In the traditional manufacture methods of metal bellows, such as tube bulging and hydroforming, the dies and tools are generally used. In these methods, it is very inconvenient to change the shapes of bellows because the dies and tools should be changed, which often result in extremely high cost. In this study, a novel manufacture method without any dies and tools for producing the metal bellows with various shapes was proposed. This novel method is called as dieless bellows forming process with local heating technique. The factors which affect the shape of metal bellows and the deformation behavior of metal tubes during the dieless metal bellows forming process were investigated by experiment and finite element method simulation in this study. The metal tubes (SUS304, JIS) with the dimensions of 13.8 (D) x 2 (t) mm and 25 (D) x 2 (t) mm were used to study the availability of the newly proposed method for manufacturing the metal bellows with different tubular materials. As a result, the metal bellows with good shapes were successfully obtained using the newly proposed method. The results also showed that the shape of the metal bellows can be easily changed by adjusting the compression ratio. It was clarified that the deformation parameters, such as compression ratio and heating length, have the significant effects on the convolution height, pitch and deformation behavior of metal tube during dieless metal bellows forming process. The suitable parameters should be chosen to manufacture the metal bellows with the expected shape.